Chip guard decals lifting by back door on both sides of kia soul !
1 - 7 of 7 Posts
Joined
·
9,513 Posts
No, at least not yet. Thanks, I will be on the look out for it but I don't remember this happening to any one else.
Joined
·
582 Posts
It's a Gen2 feature on the 2014's. 
Joined
·
1,194 Posts
I am guessing based on my experience of applying adhesive parts to body panels,that
the mounting surface was not cleaned/prepped correctly before the clear overlays were installed.
Could also be a temperature problem.Adhesive backed material may have a problem when
installed when its very cold.Could also be the bloke that did the install,touched the edges.
I'd think a body shop could replace these without a problem.The hardest part is getting the old
material off.
the mounting surface was not cleaned/prepped correctly before the clear overlays were installed.
Could also be a temperature problem.Adhesive backed material may have a problem when
installed when its very cold.Could also be the bloke that did the install,touched the edges.
I'd think a body shop could replace these without a problem.The hardest part is getting the old
material off.
1 - 7 of 7 Posts
Join the discussion
Join now to ask and comment!