Hi Gang. I've bought a can of duplicolor vinyl/plastic paint and I want to paint my stock sun visors because the warning crap is hideous to look at. Anyway, I can't seem to remove the visor. I've done some searches here and people say to just pry the plastic cover off and there are screws underneath. Well, I've tried that and I've increased the pressure slooooooowly but surely, but the plastic starts to mar before the cover comes off. Also, some posts suggested that the plastic cover is all 1 piece...and it's not on the 2012, there is a notch that appears to be a seperate piece of plastic. There is an arrow that points to where this smaller piece meets the bigger plastic piece, but the gap there is so small that I couldn't do much prying there either (again, without destroying all the plastic in the process!). Anyone have any ideas? What kind of tools do people use to remove these plastic parts without destroying them?