Kia Soul Forums :: Kia Soul Owners banner

lower

  1. Aftermarket modifications (Gen 2)
    I recently installed a set of stiffer lower engine mount bushings from Rev Motoring. (sometimes called torque mount or dogbone mount.) It keeps the engine and transmission from rotating forward and back, and when you're driving it hard, the soft mounts allow it to move around pretty violently...
  2. Soul Problems (Gen 2)
    Just wondering if anybody has similar problems and if we know the cause. 2016 plus 2.0L. I think it MIGHT be heat soak related because when it's cold outside or if the car has had a chance to cool for a few hours it is fine but as soon as it gets hot after like 10-20 minutes normal driving it...
  3. How To / DIY (Gen 2)
    Incase anyone was wondering, the Veloster poly engine mount inserts fit in the Soul too. I had to sand down the outside perimeter of mine, to get them to fit, as they were a bit too wide(I think it was just poor quality control). This is the anti-torque mount that sits on the bottom of the...
  4. For sale / Trade / Wanted
    Hi, I'm looking for the lower part of the intake box where the air filter sits. Please PM me on what you have. Looking for Gen 2, 2.0L engine. Thank you, Tj Admin - Since I still can't post in the FS thread. Please move it there.
  5. Aftermarket modifications (Gen 2)
    Is there resonator after the lower intake box, behind the fender wheel well? I'm also looking for lower intake box when the air filter sits if you guys are selling one. I'll take it. Please let me know. Moderator please move since I can't post in For Sale Thread yet (idk y).
  6. Soul General Discussion (Gen 2)
    Anybody have a soul with the lower side body molding? Have you put on mud flaps? We got new tires at 55,000 miles And the new tires must have wider tread shoulders. After drive-thru carwash the tires throw A lot more dirt spots up onto the sides of the car. I've heard the OEM mudflaps don't...
  7. Soul Accessories (Gen 2)
    So I'm not a fan of running front plates, however I don't mind putting them off to the side. When I took off my front plate today it was screwed on with 6 + screws. 1) Does anyone know if from factory they do this or is it just the dealerships silliness. 2) I can't find an aftermarket place...
  8. Soul Problems (Gen 1)
    Hi I replaced the lower ball joints on a 2011 Kia soul. But when taking it for a drive I find that the passenger side wheel rocks. You can reproduce the effect when you grab the tire and rock it back and forth. (Rocking top to bottom, from passenger side towards driver side) As far as I can...
  9. Soul Problems (Gen 1)
    I just completed the lower ball joints on my 2011 Soul. That was a bitchy job! Took it for a test drive and everything seems fine except that the "Slippery Road" symbol and the ABS light are both on. So what did I do wrong? Where do I look? Can I drive it the way it is for now? Help!?!? DR
  10. Soul Accessories (Gen 2)
    Howdy fellow Soul owners.. This 2015 is our 2nd Kia. Had a 2013, but the 2nd generation is a much better car. But--the tiny "beep-beep" horn sucks. I want to replace it with a more powerful horn, but cannot figure out how to remove the lower front intake grille. The horn is located on the front...
  11. Soul General Discussion (Gen 2)
    Soon after we bought our new 2015 Soul,we had a nearly 3 week period of rain.During the rain break,I decided to wash the Soul.Our dealer detailed,and supposedly waxed,our Soul before we took delivery.Back to the washing.While I was washing it,I noticed black streaks down the lower doors on the...
  12. Aftermarket modifications (Gen 1)
    Added Hella horns and JDM off road lights! Did all the wiring myself....and boy is it ghetto! I also tinted my reflectors and added a 1320 sticker!
  13. Aftermarket modifications (Gen 2)
    I hooked up the wiring to my new beehive LED lights (Soul nipples). They really work so well I and am going to leave them on. Wiring was very easy since I had installed trailer light wiring so I just had to tap into those. The LEDs now work with the cars Brake,Turn and Running lights. What do...
  14. Aftermarket modifications (Gen 1)
    I really want to delete that UGLY license plate mount on the lower part of my grille. I do not need it, and it is an eyesore for the look I am going for. Has anyone done custom work or found a product to replace it? Because I am DYING to get rid of it. I remember finding a thread on the...
  15. How To / DIY (Gen 1)
    Did a search and didn't find the information I'm looking for. So here goes before I start taking things apart on a new car. On the '15 Soul is the rear lower reflector the same size as the front fog light? Is the mounting hole the same size? Is it even close? Bigger is ok, could mod the...
  16. How To / DIY (Gen 1)
    I've seen a few mentions here and there and I've seen a few DIY upper cargo covers so I thought I would show ya'll my weekend project since the weather was FINALLY nice enough to be in the garage. I bought a used 2011 Soul base about a month ago. I noticed that there were peg holes in the back...
  17. Soul General Discussion (Gen 1)
    Been pondering trading in my 2010 Soul+ for a remaining 2013 or 2014 Soul. The condition is excellent, but even so, KBB lists under 10k...but every search I have done shows the selling rate to be about 12k to 13k....thoughts?
  18. Soul Problems (Gen 1)
    Hey everyone, I'm driving a 2013 6 speed auto Soul base model, with a little over a thousand miles on the odometer. I'm not sure if I didn't notice this before, but when the car changes gear (whether downshift or upshift) at around 15 MPH the gear change is definitely noticeable. This happens...
  19. Soul Problems (Gen 1)
    Is there an adjustment just for the high beams or is this a defect in the light housing? I have found the adjustment for the low beams and this seems to adjust both high and low beams. The bulbs are seated correctly, but the high beams point down infront of the low beams. Any help would be...
  20. Soul Accessories (Gen 1)
    i am looking to change out the lower grill and relocating the front plate any ideas?
Top