Kia Soul Forums :: Kia Soul Owners banner

bypass

  1. Aftermarket modifications (Gen 2)
    One of the best ways to get more power is to either order a vehicle without air conditioning (two Porsche models offer this), or to later modify a vehicle not to have the need for the air conditioning. Think of it this way... Ever notice how the engine performance is significantly effected with...
  2. Aftermarket modifications (Gen 1)
    Hello all, I have a 2013 Base Soul and am thinking about installing a secondary oil filter. The purpose of these types of filters is to only filter about 10% of the oil at a time but takes out sub 10 micron particles. Essentially giving you much cleaner oil. I have a cummins engine in my truck...
  3. Soul Problems (Gen 1)
    i seen in one of my searches, a guy saying u don't need a bypass module for a remote car starter. Now of course since i need to show it to the guy who's going to install mine i can't ifnd it. He said just do something to the ohmm wire????? Thanks everyone ahead of time for the help i have a Kia...
  4. Soul General Discussion (Gen 1)
    So this past weekend I bypassed both intake resonators... The upper one I used some duct tape to seal off the hole on the little box before shoving it back into the intake elbow... the spring clamp seals the duct tape securely. No problems there. the "big" resonator under the airbox I did by...
  5. Soul General Discussion (Gen 1)
    This should make a good discussion. I have a 2012 Soul 4U .the new ones come with a key fob and a button on the dash. I would like to find out as much as I can to bypass this fob if I need to some time. My plan is to use the fob as normal but in case of a loss I still want to run the car when I...
  6. How To / DIY (Gen 1)
    i am installing aftermarket stereo in my 2010 ! I had the stereo in previous vehicle so I chose to reuse all wiring. After running all wiring & hooking up head unit I realized i was running a an amp into the factory amp. What is the best way to bypass the factory amp as if is not even there. I...
  7. How To / DIY (Gen 1)
    This is a DIY walk-through you can do for free at home, in about 30 minutes or less, with only a pair of channel locks/pliers. The OEM Throttle Body (TB) has 2 coolant nipples on the bottom of it, allowing hot coolant to flow through passageways in the TB to keep it from freezing shut. I don't...
Top