Last edited by Hank3; 07-08-2019 at 01:41 AM.
The rear plastic piece pops off the arm rest. Then I used a hole saw (drill bit), installed the USB/cigarette lighter into the hole. To the right of the e-brake cables there is some metal, so I put in the ground there...ran the positive wire along the lower left (driver's) side of the center console. Finally ran wire up & just below steering column & tapped into fuse box with micro fuse tap. I think whole thing took 20 mins max.
I used a hole saw (drill bit),
Just a quick trip to Harbor Freight, and you have a set of them in different sizes. You can then keep them around for another job, sooner or later they will be handy. Yep, this is how I ended up with so many damn tools in the garage, and I don't need them for work that I get paid for.
Headlights are LED
Front turn signals are switchback LED(They are white by default and when the turn signal turns on they turn amber while blinking then after the turn signal goes off they go back white)
Side markers are LED
Interior lights are LED
Tail lights are LED
Reverse lights are LED
License plate lights are LED
Now I just have to do the 3rd brake light and the rear turn signals and get load resistors to stop the hyperflash.
Windows are now tinted limo tint(5%)
No all of this stuff wasn't done in a day but if anyone would like I can make a post with all of the bulb types for each spot if anyone else wanted to change theirs out with LEDs or just need to replace a bulb.
I installed front and rear turn signal LEDs a while back and really love them. Also installed parking light amber LEDs.
Last edited by Hank3; Yesterday at 02:13 PM.